Product Description
Biomass pellet machine
1.Description:
The equipment is applied to the materials with low adhesiveness and low shaping, such as the rice husk, sunflower husk, peanut shell and other fruit shell; branch, trunk, bark and other wood waste; a variety of crop straws; rubber; cement, ash and other chemical materials. This type of pellet mill is widely used in the biomass-energy fuels plant, power plant, wood processing plant, fertilizer plant, chemical plant etc. It is the ideal pressing shaping equipments with low investment and high profit.
2.Characteristics of product:
1. Upward mould, special structure; vertical feeding, never buff placer; feeding with wide inlet, and easier heat dissipation
2 Die static, roller rotating; material centrifugation, distributed around evenly; because of the die upper layer, the materials can be kicked back to the pressure room.
3 Double-layer die, multi-function, with different die holes of upper layer and lower layer; meanwhile the double-layer dies can be used together.
4 Pressing briquette with big die hole, die and tube connected together, the density of briquette can be adjusted. Only change the tubes which link the die, which reduce cost.
5 Adjusting the length of pellets & briquettes with frequency conversion, which is the separate device in the machine; the speed depends on the length of finished products.
6 Gear drive, reduce speed through multiple channels, save power and reduce the abrasion of spare parts.
7 Grease filtrated, lubricate automatically properly.
3.Technical parameter of XGJ series efficient centrifugal pellet mill
|
Model
|
Power
(KW)
|
Voltage
(V)
|
diameter of die
(mm)
|
specification of pellet (mm)
|
temperature of making pellet (℃)
|
moisture of raw material
|
Capacity (T/h)
|
|
XGJ550
|
75
|
380
|
550
|
4-10
|
80℃-160℃
|
15-20%
|
0.8-1
|
|
XGJ560
|
90
|
380
|
550
|
1-1.5
|
|
XGJ580
|
160
|
380
|
550
|
1.5-2
|
|
XGJ850
|
220
|
380
|
850
|
4-12
|
2-3
|
|
XGJ880
|
315
|
380
|
850
|
3-4
|
3.The machines is possible to pack in wooden case or nude pack after wraping by plastic film.
4.Service & Turnkey Solution
1.) Consultation service before, during,and after sales;
2.) Project planning and design service;
3.) Debugging of equipment until everything is functional;
4.) Management of equipments' long distance shipping from seller's factory to the named place by buyer;
5.) Training of equipment maintenance and operating personally;
6.) New production techniques and formulas;
7.) Provide 1 year complete warranty and life-time maintenance service.
5.Company Information
6.Glories of Company
6.World Market
Product Image
